Proper use of grease

 (1) The amount of lubrication to be filled should be appropriate

However, depending on the situation, sometimes grease should be applied to the edge of the bearing to implement cavity lubrication.

(2) Pay attention to prevent the mixed use of different types, brands and old and new greases

Avoid cross-use of grease containers and tools. Otherwise, there will be adverse effects such as a drop in the drop of fat, an increase in penetration and a decrease in mechanical stability.

(3) Pay attention to the replacement of new grease

Because the variety and quality of grease are constantly improving and changing, old equipment should be tested before trial use before trial use; when replacing new grease, waste grease should be removed and parts cleaned clean. When replenishing grease, waste grease should be squeezed out until new grease is seen at the grease outlet.

(4) Pay attention to the management of the grease filling process

Before receiving and adding grease, pay close attention to the cleaning of containers and tools. The grease supply port on the equipment should be wiped in advance to prevent the mixing of mechanical impurities, dust and sand particles.

(5) Pay attention to the timely replacement of seasonal grease

If the environment where the equipment is located varies greatly between winter and summer, and the temperature difference, if winter grease is used in summer or vice versa, the results will be counterproductive.

(6) Pay attention to adding grease regularly

Lubricating grease addition and replacement time should be determined according to specific use conditions, both to ensure reliable lubrication and not to cause waste of grease.

(7) Do not pack grease in wooden or paper containers

To prevent oil loss and hardening, mixing with water or contamination and deterioration, and should be stored in a cool and dry place.